Analysis of a Tubesheet Undergoing Rapid Transient Thermal Loading

[+] Author and Article Information
W. Reinhardt, R. Kizhatil, G. H. McClellan

Babcock & Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontario N1R 5V3, Canada

J. Pressure Vessel Technol 122(4), 476-481 (Mar 07, 2000) (6 pages) doi:10.1115/1.1286018 History: Received October 27, 1999; Revised March 07, 2000
Copyright © 2000 by ASME
Your Session has timed out. Please sign back in to continue.


O’Donnell,  W. J., and Langer,  B. F., 1962, “Design of Perforated Plates,” ASME J. Eng. Ind., 84, pp. 307–320.
ASME, 1992, Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NB, The American Society of Mechanical Engineers, New York, NY.
Slot,  T., and Branca,  T. R., 1974, “On the Determination of Effective Elastic-Plastic Properties for the Equivalent Solid Plate Analysis of Tube Sheets,” ASME J. Pressure Vessel Technol., 86, pp. 220–227.
Lemaitre, J., and Chaboche, J.-L., 1990, Mechanics of Solid Materials, Cambridge University Press, Cambridge, UK.
Kamenjarzh,  J., and Merzijakov,  A., 1994, “On Kinematic Method in Shakedown Theory: I. Duality of Extremum Problems,” Int. J. Plast., 10, No. 4, pp. 363–380.
Gross-Weege,  J., 1990, “A Unified Formulation of Statical Shakedown Criteria for Geometrically Nonlinear Problems,” Int. J. Plast., 6, pp. 443–447.
Hassan,  T., and Kyriakides,  S., 1992, “Ratcheting in Cyclic Plasticity, Part I: Uniaxial Behavior,” Int. J. Plast., 8, pp. 91–116.
Hassan,  T., Corona,  E., and Kyriakides,  S., 1992, “Ratcheting in Cyclic Plasticity, Part II: Multiaxial Behavior,” Int. J. Plast., 8, pp. 117–146.
Uga,  T., 1974, “An Experimental Study on Thermal Stress Ratcheting of Austenitic Stainless Steel by a Three Bar Specimen,” Nucl. Eng. Des., 26, pp. 326–335.
Rider,  R. J., Harvey,  S. J., and Chandler,  H. D., 1995, “Fatigue and Ratcheting Interactions,” Int. J. Fract., 17, No. 7, pp. 507–511.
Xia,  Z., Kujawski,  D., and Ellyin,  F., 1996, “Effect of Mean Stress and Ratcheting Strain on Fatigue Life of Steel,” Int. J. Fract., 18, No. 5, pp. 335–347.
Hassan, T., Zhu, Y., and Matzen, V. C., 1996, “Improved Simulation of Ratcheting in Straight Pipes,” ASME PVP-Vol. 343, pp. 35–38.
Hassan, T., Zhu, Y., and Matzen, V. C., 1996, “Simulation of Ratcheting in Straight Pipes using ANSYS with an Improved Cyclic Plasticity Model,” ASME PVP-Vol. 340, pp. 97–104.
Sullivan, R. C., Kizhatil, R., and McClellan, G. H., 1997 “Correction of Equivalent Elastic-Plastic Anisotropic Properties of Thick Tubesheets to Preclude Overstiff Response to Monotonic Loading,”ASME PVP-Vol. 354, pp. 121–126.
ANSYS, 1996, Revision 5.3 Swanson Analysis Systems Inc. Houston, PA.
Reinhardt, W., 2001, “Yield Criteria for the Elastic-Plastic Design of Tubesheets with Triangular Penetration Pattern,” to be published, ASME J. Pressure Vessel Technol., 123 .
Jones, D. P., and Gordon, J. L., 1979, “Elasto-Plastic Analysis of Perforated Plates Containing Triangular Perforation Patterns of 10% Ligament Efficiency,” ASME Paper No. 79-PVP-32.


Grahic Jump Location
Decrease of material shakedown with the tangent modulus for a biaxially loaded plate using linear kinematic hardening
Grahic Jump Location
Model of a tubesheet ligament (hole diameter d, pitch p) and equivalent solid element
Grahic Jump Location
Comparison of the ratcheting behavior of an elastic-plastic ligament model and of the equivalent anisotropic solid
Grahic Jump Location
Heat exchanger tubesheet geometry
Grahic Jump Location
Bounding level A/B transient for the heat exchanger tubesheet
Grahic Jump Location
Out-of-plane deformation of selected points in the perforated region of the heat exchanger tubesheet subjected to four cycles of the transient shown in Fig. 5
Grahic Jump Location
Out-of-plane deformation of selected points on the solid rim and on the no-tube lanes of the heat exchanger tubesheet subjected to four cycles of the transient shown in Fig. 5




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In