0
TECHNICAL PAPERS

Effects of Void Growth and Nucleation on Plastic Deformation of Plates With Fluid-Structure Interaction

[+] Author and Article Information
Y. W. Kwon, P. M. McDermott

Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943

J. Pressure Vessel Technol 123(4), 480-485 (May 23, 2001) (6 pages) doi:10.1115/1.1400740 History: Received October 31, 2000; Revised May 23, 2001
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.

References

Koziey,  B. L., and Mirza,  F. A., 1997, “Consistent Thick Shell Element,” Comput. Struct., 65, No. 4, pp. 531–549.
Allman,  D. J., 1988, “Evaluation of the Constant Strain Triangle with Drilling Rotations,” Int. J. Numer. Methods Eng., 26, pp. 2645–2655.
Khaski,  A. M., and Soler,  A. L., 1985, “A Finite Element for General Thick-Walled Shell Structures,” ASME J. Pressure Vessel Technol., 107, pp. 126–133.
Cook,  R. D., 1994, “Four-Node ’Flat’ Shell Element: Drilling Degrees of Freedom, Membrane-Bending Coupling, Warped Geometry, and Behavior,” Comput. Struct., 50, No. 4, pp. 549–555.
Kemp,  B. L., Cho,  C., and Lee,  S. W., 1998, “A Four-Node Solid Shell Element Formulation With Assumed Strain,” Int. J. Numer. Methods Eng., 43, pp. 909–924.
Zhu,  Y., and Zacharia,  T., 1996, “A New One-Point Quadrature, Quadrilateral Shell Element With Drilling Degrees of Freedom,” Comput. Methods Appl. Mech. Eng., 136, pp. 165–203.
Zeng,  Q., and Comescure,  A., 1998, “A New One-Point Quadrature, General Non-Linear Quadrilateral Shell Element with Physical Stabilization,” Int. J. Numer. Methods Eng., 42, pp. 1307–1338.
Rengarajan,  G., Aminpour,  M. A., and Knight,  N. F., 1995, “Improved Assumed-Stress Hybrid Shell Element with Drilling Degrees of Freedom for Linear Stress, Buckling and Free Vibration Analysis,” Int. J. Numer. Methods Eng., 38, pp. 1917–1943.
Briassoulis,  D., 1989, “The C0 Shell Plate and Beam Elements Freed from their Deficiencies,” Comput. Methods Appl. Mech. Eng., 72, pp. 243–266.
Ibrahimbegovic,  A., Taylor,  R. L., and Wilson,  E. L., 1990, “A Robust Quadrilateral Membrane Finite Element with Drilling Degrees of Freedom,” Int. J. Numer. Methods Eng., 30, pp. 445–457.
Key,  S. W., and Hoff,  C. C., 1995, “An Improved Constant Membrane and Bending Stress Shell Element for Explicit Transient Dynamics,” Comput. Methods Appl. Mech. Eng., 124, pp. 33–47.
Lay,  K. S., 1993, “Shell Finite Element Formulated on Shell Middle Surface,” J. Eng. Mech., 119, No. 10, pp. 1973–1992.
Addessio,  F. L., Johnson,  J. N., and Maudlin,  P. J., 1993, “The Effect of Void Growth on Taylor Cylinder Impact Experiments,” J. Appl. Phys., 73, No. 11, pp. 7288–7297.
Hancock,  J. W., and Thomson,  R. D., 1985, “Strain and Stress Concentrations in Ductile Fracture by Void Nucleation, Growth and Coalescence,” Mater. Sci. Technol., 1, pp. 684–690.
Chu,  C. C., and Needleman,  A., 1980, “Void Nucleation Effects in Biaxially Stretched Sheets,” ASME J. Eng. Mater. Technol., 102, pp. 249–256.
Tvergaard,  V., 1981, “Influence of Voids on Shear Band Instabilities Under Plane Strain Conditions,” Int. J. Fract., 17, No. 4, pp. 389–406.
Gurson,  A. L., 1977, “Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Materials,” ASME J. Eng. Mater. Technol., 99, pp. 2–15.
Nagtegaal,  J. C., Parks,  D. M., and Rice,  J. R., 1974, “On Numerically Accurate Finite Element Solutions in the Fully Plastic Range,” Comput. Methods Appl. Mech. Eng., 4, pp. 153–177.
Shi,  G., and Voyiadjis,  G. Z., 1993, “A Computational Model for FE Ductile Plastic Damage Analysis and Plate Bending,” J. Appl. Mech., 60, pp. 749–758.
Lee,  J. H., and Zhang,  Y., 1994, “A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage,” ASME J. Eng. Mater. Technol., 116, pp. 69–79.
Aravas,  N., 1987, “On the Numerical Integration of a Class of Pressure-Dependent Plasticity Models,” Int. J. Numer. Methods Eng., 24, pp. 1395–1416.
Essenburg, F., 1975, “On the Significance of the Inclusion of the Effect of Transverse Normal Strain in Problems Involving Beams With Surface Constraints,” J. Appl. Mech., Mar., pp. 127–132.
Belytschko,  T., Tsay,  C. S., and Liu,  W. K., 1981, “A Stabilization Matrix for the Bilinear Mindlin Plate Element,” Comput. Methods Appl. Mech. Eng., 29, pp. 313–327.

Figures

Grahic Jump Location
Hourglass mode control integration points
Grahic Jump Location
Clamped wet plate subjected to pressure wave
Grahic Jump Location
Plot of effective stresses versus time at the tensile and compressive surfaces of the center of the clamped plate
Grahic Jump Location
Plot of effective plastic strains versus time at the tensile and compressive surfaces of the center of the clamped plate
Grahic Jump Location
Plot of effective stresses versus effective plastic strains at the tensile and compressive surfaces of the center of the clamped plate
Grahic Jump Location
Plot of porosity versus effective plastic strain
Grahic Jump Location
Contour plot of porosity at time of 0.018

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In