0
TECHNICAL PAPERS

An Experimental Study of Friction During Planar Elastic Impact

[+] Author and Article Information
Edward E. Osakue, Robert J. Rogers

Department of Mechanical Engineering, University of New Brunswick, Fredericton, NB E3B 5A3, Canada

J. Pressure Vessel Technol 123(4), 493-500 (Jul 20, 2001) (8 pages) doi:10.1115/1.1408304 History: Received March 20, 2001; Revised July 20, 2001
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.

References

Ko,  P. L., 1985, “The Significance of Shear and Normal Force Components on Tube Wear Due to Fretting and Periodic Impact,” Wear, 106, pp. 261–281.
Osakue, E. E., 1999, “A Study of Friction During Low-Velocity Impact,” Ph.D. thesis, Dept. of Mechanical Engineering, University of New Brunswick, Fredericton, Canada.
Brach, R. M., 1991, Mechanical Impact Dynamics, John Wiley and Sons, New York, NY.
Marghitu, D. B., 1995, “Frictional Impact of an Elastic Body,” ASME Design Eng. Technical Conf., DE 87-1, 3, Part A, pp. 191–201.
Blau, P. J., 1996, Friction Science and Technology, Marcel Dekker, New York, NY.
Kragelsky, I. G. and Bronovetz, M. A., 1973, “On the Nature of Friction During Impact,” Proc. 1st European Congress on Tribology, pp. 109–118.
Routh, E. J., 1897, Dynamics of a System of Rigid Bodies, Macmillan, London, U.K.
Brach,  R. M., 1988, “Impact Dynamics with Applications to Solid Particle Erosion,” Int. J. Impact Eng., 7, pp. 37–53.
Brach,  R. M., 1993, “Classical Planar Impact Theory and the Tip Impact of a Slender Rod,” Int. J. Impact Eng., 13, 1, pp. 21–23.
Goldsmith, W., 1960, Impact: Theory and Physical Behavior of Colliding Bodies, Edward Arnord, London, U.K.
Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge, U.K.
Jaeger, J., 1992, “Elastic Impact with Friction,” Ph.D. thesis, Delft University, The Netherlands.
Jaeger,  J., 1993, “Elastic Contact of Equal Spheres Under Oblique Forces,” Arch. Appl. Mech., 63, pp. 402–412.
Jaeger,  J., 1994, “Oblique Impact of Similar Bodies with Circular Contact,” Acta Mech., 107, pp. 101–115.
Mindlin,  R. D., 1949, “Compliance of Elastic Bodies in Contact,” ASME J. Appl. Mech., 16, pp. 259–268.
Maw,  N., Barber,  R. J., and Fawcett,  N. J., 1976, “Oblique Elastic Impact,” Wear, 38, pp. 101–114.
Maw,  N., and Barber,  R. J., 1981, “The Role of Elastic Tangential Compliance in Oblique Impact,” J. Lubr. Technol., 3, pp. 74–80.
Levy,  G., and Morri,  J., 1985, “Impact Wear in CO2 Environment,” Wear, 106, 1–3, pp. 97–138.
Lewis,  A. D., and Rogers,  R. J., 1988, “Experimental and Numerical Study of Forces During Oblique Impact,” J. Sound Vib., 141, 3, pp. 403–412.
Rogers,  R. J., and Lewis,  A. D., 1990, “Further Studies of Oblique Impact,” J. Sound Vib., 141, 3, pp. 507–510.
Stoianovici,  D., and Hurmuzlu,  Y., 1996, “A Critical Study of the Applicability of Rigid-Body Collision Theory,” ASME J. Appl. Mech., 63, pp. 307–316.
Haslinger,  K. H., and Steininger,  D. A., 1995, “Experimental Characterization of Sliding and Impact Friction Coefficients Between Steam Generator Tubes and Supports,” J. Sound Vib., 181, pp. 851–871.
Bloch, S. C. 1992, SSP: The Spreadsheet Signal Processor, Prentice Hall, Englewood Cliffs, NJ, p. 7.
Kane, R. T. and Levinson, D. A., 1985, Dynamics: Theory and Applications, McGraw-Hill, New York, NY, p. 348.

Figures

Grahic Jump Location
Contact patch—(a) stick and slip zones; (b) shear stress distribution
Grahic Jump Location
Stick-slip and gross-slip friction regimes
Grahic Jump Location
Setup for an experiment—(a) side view when θa=0; (b) top view
Grahic Jump Location
Normalized normal contact force for (a) 92 mm/s at selected impact angles; (b) 20 deg at selected impact velocities
Grahic Jump Location
Normalized tangential force for (a) 92 mm/s impact velocity at selected impact angles; (b) 20 deg-impact angle at selected impact velocities
Grahic Jump Location
Normalized force modulus plots for 92 mm/s impact velocity at selected impact angles
Grahic Jump Location
Normalized impulse modulus plots for 92 mm/s impact velocity at selected impact angles
Grahic Jump Location
Traction coefficient plots for 92 mm/s impact velocity at selected impact angles
Grahic Jump Location
Stiction factor plots for 92 mm/s impact velocity at selected impact angles
Grahic Jump Location
Impulse and specific traction ratios for 92 mm/s
Grahic Jump Location
Transition impulse ratio

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In