0
TECHNICAL PAPERS

A Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint From Stress-Relief Annealing—Part III: Development of Estimating Equations for Multiaxial Stress State in Thick Welded Joint

[+] Author and Article Information
Keiji Nakacho

Joining and Welding Research Institute, Osaka University, Ibaraki, Osaka 567-0047, Japane-mail: nakacho@jwri.osaka-u.ac.jp

J. Pressure Vessel Technol 124(1), 14-21 (Jun 13, 2001) (8 pages) doi:10.1115/1.1398080 History: Received August 18, 1999; Revised June 13, 2001
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Ueda,  Y., and Fukuda,  K., 1975, “Application of Finite Element Method for Analysis on Process of Stress Relief Annealing,” (in Japanese), Journal of JWS, The Japan Welding Society, 44, No. 11, pp. 902–908.
Ueda,  Y., and Fukuda,  K., 1975, “Analysis of Welding Stress Relieving by Annealing Based on Finite Element Method,” Trans. JWRI, Welding Research Institute of Osaka University, Japan, 4, No. 1, pp. 39–45.
Ueda,  Y., and Fukuda,  K., 1977, “Application of Finite Element Method for Analysis on Process of Stress Relief Annealing,” Trans. JWS, The Japan Welding Society, 8, No. 1, pp. 19–25.
Ueda,  Y., Takahashi,  E., Fukuda,  K., Sakamoto,  K., and Nakacho,  K., 1976, “Multipass Welding Stresses in Very Thick Plates and Their Reduction from Stress Relief Annealing,” Trans. JWRI, 5, No. 2, pp. 79–189.
Ueda, Y., Fukuda, K., Nakacho, K. Takahashi, E., and Sakamoto, K., 1976, “Transient and Residual Stresses from Multipass Weld in Very Thick Plates and Their Reduction from Stress Relief Annealing,” Proc. Third International Conference on Pressure Vessel Technology, ASME, Part II, pp. 925–933.
Ueda, Y., Fukuda, K., Nakacho, K., 1977, “Basic Procedures in Analysis and Measurement of Welding Residual Stresses by the Finite Element Method,” Proc. International Conference on Residual Stresses in Welded Construction and Their Effects, TWI, pp. 27–37.
Ueda,  Y., Takahashi,  E., Fukuda,  K., Sakamoto,  K., and Nakacho,  K., 1978, “Mechanical Behavior of Multipass Welded Joint during Stress Relief Annealing” (in Japanese), Journal of JWS, The Japan Welding Society, 47, No. 8, pp. 500–506.
Nakacho,  K., and Ueda,  Y., 1996, “A Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint from Stress-Relief Annealing—Part I: Development of the Analytical Method for Relaxation Tests and Its Applicability,” ASME J. Pressure Vessel Technol., 118, pp. 343–350.
Nakacho,  K., and Ueda,  Y., 1999, “A Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint from Stress-Relief Annealing—Part II: The Characteristics of Reduction of Welding Residual Stresses in Very Thick Joints during SR Treatment,” ASME J. Pressure Vessel Technol., 121, pp. 11–16.

Figures

Grahic Jump Location
Flow chart of calculation by simple estimating method
Grahic Jump Location
Idealized mechanical model of butt-welded joint

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In