Skip Nav Destination
Issues
April 2006
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
A New Method for Elastic-Plastic Contact Analysis of a Deformable Sphere and a Rigid Flat
J. Tribol. April 2006, 128(2): 221–229.
doi: https://doi.org/10.1115/1.2164469
Topics:
Deformation
,
Pressure
,
Simulation
,
Stress
,
Errors
,
Finite element methods
,
Finite element analysis
,
Computer software
,
Metals
Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat
J. Tribol. April 2006, 128(2): 230–235.
doi: https://doi.org/10.1115/1.2164470
Topics:
Aluminum
,
Deformation
,
Pressure
,
Stress
,
Plasticity
Elastic-Plastic Contact Between Rough Surfaces: Proposal for a Wear or Running-In Model
J. Tribol. April 2006, 128(2): 236–244.
doi: https://doi.org/10.1115/1.2163360
Topics:
Plasticity
,
Stress
,
Surface roughness
,
Wear
,
Cycles
,
Pressure
,
Algorithms
Elastic-Plastic Contact Behavior Considering Asperity Interactions for Surfaces With Various Height Distributions
J. Tribol. April 2006, 128(2): 245–251.
doi: https://doi.org/10.1115/1.2162557
Topics:
Deformation
,
Plasticity
,
Separation (Technology)
,
Stress
,
Surface roughness
Vibration Response of Rolling Element Bearings in a Rotor Bearing System to a Local Defect Under Radial Load
J. Tribol. April 2006, 128(2): 252–261.
doi: https://doi.org/10.1115/1.2164467
Topics:
Bearings
,
Excitation
,
Rolling bearings
,
Rotors
,
Stress
,
Vibration
,
Spectra (Spectroscopy)
Performance Evaluation of Innovative Micro-Traction-Drive-Utilized Angular-Contact Bearing
J. Tribol. April 2006, 128(2): 262–266.
doi: https://doi.org/10.1115/1.2162177
Theoretical and Experimental Investigations Into Spacing Characteristics Between Roller and Three Types of Webs With Different Permeabilities
J. Tribol. April 2006, 128(2): 267–274.
doi: https://doi.org/10.1115/1.2164463
Topics:
Film thickness
,
Permeability
,
Rollers
,
Tension
In Vitro Study of Backside Wear Mechanisms on Mobile Knee-Bearing Components
J. Tribol. April 2006, 128(2): 275–281.
doi: https://doi.org/10.1115/1.2162916
Topics:
Bearings
,
Bone
,
Cements (Adhesives)
,
Knee
,
Particulate matter
,
Wear
,
Cycles
,
Coating processes
,
Coatings
,
Testing
Thermal and Non-Newtonian Numerical Analyses for Starved EHL Line Contacts
J. Tribol. April 2006, 128(2): 282–290.
doi: https://doi.org/10.1115/1.2164465
Topics:
Film thickness
,
Lubricants
,
Numerical analysis
,
Pressure
,
Temperature
,
Traction
,
Leakage
,
Fluids
,
Viscosity
,
Stress
An Efficient Algorithm for Fluid Force and its Jacobian Matrix in Journal Bearing
J. Tribol. April 2006, 128(2): 291–295.
doi: https://doi.org/10.1115/1.2162559
Topics:
Algorithms
,
Fluids
,
Jacobian matrices
,
Journal bearings
,
Bearings
Lubricating Properties of Water in Oil Emulsions
J. Tribol. April 2006, 128(2): 296–311.
doi: https://doi.org/10.1115/1.2164464
Topics:
Emulsions
,
Film thickness
,
Stress
,
Water
,
Computer simulation
,
Friction
,
Lubricants
,
Steel
,
Pressure
Thermohydrodynamic Behavior of a Slider Pocket Bearing
J. Tribol. April 2006, 128(2): 312–318.
doi: https://doi.org/10.1115/1.2162914
Topics:
Bearings
,
Temperature
,
Pressure
,
Lubricants
,
Thermohydrodynamics
,
Film thickness
,
Flow (Dynamics)
,
Stress
,
Geometry
,
Finite volume methods
Influence of Inlet Oil Temperature on the Instability Threshold of Rotor-Bearing Systems
J. Tribol. April 2006, 128(2): 319–326.
doi: https://doi.org/10.1115/1.2162920
Topics:
Bearings
,
Rotors
,
Temperature
,
Vibration
Design of Optimized Opposed Slider Air Bearings for High-Speed Recording on a Metal Foil Disk
J. Tribol. April 2006, 128(2): 327–334.
doi: https://doi.org/10.1115/1.2162917
Topics:
Air bearings
,
Disks
,
Metal foil
,
Stiffness
,
Shock (Mechanics)
,
Storage
,
Design
,
Etching
,
Pressure
Finite Element Analysis of the Coupled Journal and Thrust Bearing in a Computer Hard Disk Drive
J. Tribol. April 2006, 128(2): 335–340.
doi: https://doi.org/10.1115/1.2162918
The Use of System Identification Methods to Evaluate the Effects of Slider-Disk Contacts and Disk Micro-Waviness on the Flying Height Modulations
J. Tribol. April 2006, 128(2): 341–344.
doi: https://doi.org/10.1115/1.2162551
Topics:
Disks
,
Magnetic recording
The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces
J. Tribol. April 2006, 128(2): 345–350.
doi: https://doi.org/10.1115/1.2148419
Characteristics of Powder Lubricated Finite-Width Journal Bearings: A Hydrodynamic Analysis
J. Tribol. April 2006, 128(2): 351–357.
doi: https://doi.org/10.1115/1.2162558
Topics:
Bearings
,
Collisions (Physics)
,
Elasticity
,
Flow (Dynamics)
,
Friction
,
Journal bearings
,
Lubrication
,
Particle size
,
Stress
,
Pressure
A Lattice-Based Cellular Automata Modeling Approach for Granular Flow Lubrication
J. Tribol. April 2006, 128(2): 358–364.
doi: https://doi.org/10.1115/1.2164466
Experimental Study of a Squeeze Film Damper With Eccentric Circular Orbits
J. Tribol. April 2006, 128(2): 365–377.
doi: https://doi.org/10.1115/1.2162555
Topics:
Bearings
,
Cavitation
,
Dampers
,
Pressure
,
Signals
,
Rupture
,
Vapors
,
Sensors
,
Waves
,
Air entrainment
Rotordynamic-Coefficients and Static (Equilibrium Loci and Leakage) Characteristics for Short, Laminar-flow Annular Seals
J. Tribol. April 2006, 128(2): 378–387.
doi: https://doi.org/10.1115/1.2164468
Topics:
Compressors
,
Damping
,
Equilibrium (Physics)
,
Flow (Dynamics)
,
Laminar flow
,
Leakage
,
Pressure
,
Rotors
,
Stiffness
,
Stress
Frequency Dependency of Measured and Predicted Rotordynamic Coefficients for a Load-On-Pad Flexible-Pivot Tilting-Pad Bearing
J. Tribol. April 2006, 128(2): 388–395.
doi: https://doi.org/10.1115/1.2162552
Topics:
Bearings
,
Stiffness
,
Stress
,
Excitation
,
Damping
,
Flow (Dynamics)
Numerical Modelling of High Pressure Gas Face Seals
J. Tribol. April 2006, 128(2): 396–405.
doi: https://doi.org/10.1115/1.2164471
Topics:
Flow (Dynamics)
,
Fluids
,
High pressure (Physics)
,
Pressure
,
Temperature
,
Inertia (Mechanics)
,
Boundary-value problems
,
Modeling
Optimization of the Cross Section of an Elastomeric Seal for Pneumatic Cylinders
J. Tribol. April 2006, 128(2): 406–413.
doi: https://doi.org/10.1115/1.2162915
Topics:
Cylinders
,
Friction
,
Geometry
,
Pistons
,
Pneumatic cylinders
,
Pressure
,
Stress
,
Finite element analysis
,
Optimization
,
Sealing (Process)
Global Analysis Method of Friction Parameters in Strip-Drawing Tests
J. Tribol. April 2006, 128(2): 414–421.
doi: https://doi.org/10.1115/1.2162919
Topics:
Aluminum
,
Delays
,
Friction
,
Modeling
,
Strips
,
Transfer functions
,
Steel sheet
,
Lubrication
,
Machinery
,
Stress
Modeling and Parametric Study of Torque in Open Clutch Plates
J. Tribol. April 2006, 128(2): 422–430.
doi: https://doi.org/10.1115/1.2162553
Topics:
Clearances (Engineering)
,
Drag (Fluid dynamics)
,
Flow (Dynamics)
,
Plates (structures)
,
Pressure
,
Simulation
,
Torque
,
Modeling
,
Shear stress
,
Disks
Technical Briefs
An Approximate Analytical Model for the Separation of a Sphere From a Flat in the Presence of a Liquid
J. Tribol. April 2006, 128(2): 431–435.
doi: https://doi.org/10.1115/1.2162556
Topics:
Separation (Technology)
,
Inertia (Mechanics)
,
Viscosity
Bio-Ferrography to Capture and Separate Polyethylene Wear Debris from Hip Simulator Fluid and Compared with Conventional Filter Method
J. Tribol. April 2006, 128(2): 436–441.
doi: https://doi.org/10.1115/1.2162554
Topics:
Filters
,
Fluids
,
Particulate matter
,
Wear
Erratum
Erratum: “Elastic-Plastic Finite Element Analysis of Nonsteady State Partial Slip Wheel-Rail Rolling Contact” [Journal of Tribology, 2005, 127(4), pp. 713–721]
J. Tribol. April 2006, 128(2): 442.
doi: https://doi.org/10.1115/1.2173641
Topics:
Finite element analysis
,
Rails
,
Rolling contact
,
Tribology
,
Wheels
,
Elastoplasticity
,
Rolling friction
Email alerts
RSS Feeds
Tribological Behavior of Annealed FeCoNiMn0.25Al0.25 High-Entropy Alloy
J. Tribol (November 2025)
Friction Reduction and Lubrication Performance of New Microemulsion Cutting Fluid for AISI 1045
J. Tribol (December 2025)
Friction and Wear Behaviors of HT200 Sliding Against QT600 Under Flame Ablation Environment
J. Tribol (December 2025)