Skip Nav Destination
Issues
October 2010
ISSN 0742-4787
EISSN 1528-8897
Research Papers
Applications
A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races
J. Tribol. October 2010, 132(4): 041101.
doi: https://doi.org/10.1115/1.4002333
Topics:
Ball bearings
,
Bearings
,
Dynamic models
,
Vibration
Contact Mechanics
Multiple Normal Loading-Unloading Cycles of a Spherical Contact Under Stick Contact Condition
J. Tribol. October 2010, 132(4): 041401.
doi: https://doi.org/10.1115/1.4002103
Topics:
Cycles
,
Hardening
,
Stress
,
Kinematics
Impact of a Fixed-Length Rigid Cylinder on an Elastic-Plastic Homogeneous Body
J. Tribol. October 2010, 132(4): 041402.
doi: https://doi.org/10.1115/1.4002331
Topics:
Cylinders
,
Finite element analysis
,
Storage
,
Disks
,
Contact mechanics
,
Deformation
,
Stress
Investigation of Inclined Planar Rough Surfaces Contact From Static to Sliding
J. Tribol. October 2010, 132(4): 041403.
doi: https://doi.org/10.1115/1.4002378
Topics:
Displacement
,
Friction
,
Simulation
,
Surface roughness
An Approach for Modeling Material Grain Structure in Investigations of Hertzian Subsurface Stresses and Rolling Contact Fatigue
J. Tribol. October 2010, 132(4): 041404.
doi: https://doi.org/10.1115/1.4002521
Topics:
Fatigue
,
Finite element analysis
,
Stress
,
Topology
,
Pressure
,
Rolling contact
,
Modeling
Elastohydrodynamic Lubrication
Visco-Elastohydrodynamic Model of a Hydraulic Rod Seal During Transient Operation
J. Tribol. October 2010, 132(4): 041501.
doi: https://doi.org/10.1115/1.4002542
Topics:
Deformation
,
Film thickness
,
Fluid pressure
,
Microscale devices
,
Pressure
,
Sealing (Process)
,
Viscoelasticity
,
Friction
,
Transients (Dynamics)
,
Cavitation
Friction & Wear
Investigation of Temperature Effects on Cavitation Erosion Behavior Based on Analysis of Erosion Particles
J. Tribol. October 2010, 132(4): 041601.
doi: https://doi.org/10.1115/1.4002069
Topics:
Cavitation erosion
,
Erosion
,
Particle size
,
Particulate matter
,
Temperature
,
Wear
,
Damage
,
Cavitation
,
Weight (Mass)
Effects of Some Solid Lubricants Suspended in Oil Toward Controlling the Wear Performance of a Cast Iron
J. Tribol. October 2010, 132(4): 041602.
doi: https://doi.org/10.1115/1.4002217
Topics:
Cast iron
,
Graphite
,
Lubricants
,
Wear
,
Pressure
,
Talc (Mineral)
,
Particulate matter
Wear Characteristics of NiTi/Al6061 Short Fiber Metal Matrix Composite Reinforced With SiC Particulates
J. Tribol. October 2010, 132(4): 041603.
doi: https://doi.org/10.1115/1.4002332
Topics:
Composite materials
,
Fibers
,
Nickel titanium alloys
,
Particulate matter
,
Wear
,
Wear resistance
,
Wear testing
,
Sintering
Does Thermal Conductivity Play a Role in Sliding Wear of Metals in Cryogenic Environment?
J. Tribol. October 2010, 132(4): 041604.
doi: https://doi.org/10.1115/1.4002503
Topics:
Steel
,
Temperature
,
Thermal conductivity
,
Wear
,
Wear testing
,
Metals
,
Friction
,
Copper
,
Titanium
,
Stress
Coffee Stain Ring Effect and Nonuniform Material Removal in Chemical Mechanical Polishing
J. Tribol. October 2010, 132(4): 041605.
doi: https://doi.org/10.1115/1.4002108
Topics:
Evaporation
,
Flow (Dynamics)
,
Polishing
,
Semiconductor wafers
,
Slurries
,
Microfluidics
Condition Monitoring of Molybdenum Disulphide Coated Thrust Ball Bearings Using Time-Frequency Signal Analysis
J. Tribol. October 2010, 132(4): 041606.
doi: https://doi.org/10.1115/1.4002379
Topics:
Ball bearings
,
Coating processes
,
Coatings
,
Damage
,
Failure
,
Friction
,
Signals
,
Thrust
,
Vibration
,
Wear
Hydrodynamic Lubrication
A Comparative Thermal Analysis of Slot-Entry and Hole-Entry Hybrid Journal Bearings Lubricated With Non-Newtonian Lubricant
J. Tribol. October 2010, 132(4): 041701.
doi: https://doi.org/10.1115/1.4002034
Topics:
Bearings
,
Flow (Dynamics)
,
Fluid films
,
Journal bearings
,
Lubricants
,
Temperature
,
Valves
,
Viscosity
,
Thermal analysis
,
Heat conduction
A Mass-Conserving Complementarity Formulation to Study Lubricant Films in the Presence of Cavitation
J. Tribol. October 2010, 132(4): 041702.
doi: https://doi.org/10.1115/1.4002215
Topics:
Bearings
,
Cavitation
,
Lubricants
,
Algorithms
,
Finite element analysis
A Baseline Theory for the Design of Oil-Lubricated Centrally Pivoted Plane-Pad Thrust Bearings
J. Tribol. October 2010, 132(4): 041703.
doi: https://doi.org/10.1115/1.4002219
Topics:
Bearings
,
Design
,
Lubricants
,
Stress
,
Temperature
,
Thrust bearings
,
Viscosity
,
Film thickness
,
Friction
,
Pressure
A Study of Worn Hybrid Journal Bearing System With Different Recess Shapes Under Turbulent Regime
J. Tribol. October 2010, 132(4): 041704.
doi: https://doi.org/10.1115/1.4002502
Topics:
Bearings
,
Flow (Dynamics)
,
Fluid films
,
Journal bearings
,
Shapes
,
Turbulence
,
Wear
,
Reynolds number
Mixed and Boundary Lubrication
Theoretical Modeling for Microgrooved Journal Bearings Under Mixed Lubrication
J. Tribol. October 2010, 132(4): 042101.
doi: https://doi.org/10.1115/1.4002214
Topics:
Bearings
,
Friction
,
Lubrication
,
Stress
,
Journal bearings
Technical Briefs
Pure Squeeze Motion in a Magneto-Elastohydrodynamic Lubricated Spherical Conjunction
J. Tribol. October 2010, 132(4): 044501.
doi: https://doi.org/10.1115/1.4002182
Topics:
Lubricants
,
Lubrication
,
Magnetic fields
,
Pressure
,
Stress
,
Viscosity
,
Film thickness
,
Fluids
,
Transients (Dynamics)
,
Deformation
Research on the Effect of Whole Cylinder Block on EHL Performance of Main Bearings Considering Crankshaft Deformation for Internal Combustion Engine
J. Tribol. October 2010, 132(4): 044502.
doi: https://doi.org/10.1115/1.4002216
Topics:
Bearings
,
Cylinders
,
Deformation
,
Internal combustion engines
Microstructure and Wear Properties of Laser Clad (Ti,Mo)C Multiple Carbide Reinforced Fe-Based Composite Coating
J. Tribol. October 2010, 132(4): 044503.
doi: https://doi.org/10.1115/1.4002068
Topics:
Coating processes
,
Coatings
,
Lasers
,
Wear
,
Composite materials
,
Cladding systems (Building)
Repeatability Estimation in Galling Resistance Testing
J. Tribol. October 2010, 132(4): 044504.
doi: https://doi.org/10.1115/1.4002504
Topics:
Galling
,
Stress
,
ASTM International
,
Testing
,
Stainless steel
Experimental Studies Using Response Surface Methodology for Condition Monitoring of Ball Bearings
J. Tribol. October 2010, 132(4): 044505.
doi: https://doi.org/10.1115/1.4002520
Topics:
Response surface methodology
,
Condition monitoring
,
Stress
,
Vibration
,
Bearings
,
Ball bearings
,
Design
Errata
Erratum: “Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution” [Journal of Tribology, 2010, 132(3), p. 031602]
J. Tribol. October 2010, 132(4): 047001.
doi: https://doi.org/10.1115/1.4002486
Topics:
Friction
,
Stiction
,
Surface roughness
,
Tribology
Email alerts
RSS Feeds
Tribological Behavior of Annealed FeCoNiMn0.25Al0.25 High-Entropy Alloy
J. Tribol (November 2025)
Friction Reduction and Lubrication Performance of New Microemulsion Cutting Fluid for AISI 1045
J. Tribol (December 2025)
Friction and Wear Behaviors of HT200 Sliding Against QT600 Under Flame Ablation Environment
J. Tribol (December 2025)
