Topics: Blades , Boundary layers , Cascades (Fluid dynamics) , Flow (Dynamics) , Shock (Mechanics) , Wakes , Pressure , Fluids , Separation (Technology)

Investigating the Unsteady Dynamics of a Multi-Jet Impingement Cooling Flow Using Large Eddy Simulation

Christian Morsbach, Marcel Matha, Robin G. Brakmann, Sadiya Tabassum, Michael Bergmann, Michael Schroll, Christian Willert, Edmund Kügeler

J. Turbomach. March 2025, 147(3): 031002. doi: https://doi.org/10.1115/1.4066508

Abstracts

View articletitled, Investigating the Unsteady Dynamics of a Multi-Jet Impingement Cooling Flow Using Large Eddy Simulation

Open the PDF for in another window

Topics: Cross-flow , Dynamics (Mechanics) , Flow (Dynamics) , Inflow , Jets , Large eddy simulation , Temperature , Turbulence , Impingement cooling , Heat transfer

Influence of Dilution and Effusion Flows in Generating Variable Inlet Profiles for a High-Pressure Turbine

Chad B. Schaeffer, Michael D. Barringer, Stephen P. Lynch, Karen A. Thole

J. Turbomach. March 2025, 147(3): 031003. doi: https://doi.org/10.1115/1.4066560

Abstract

View articletitled, Influence of Dilution and Effusion Flows in Generating Variable Inlet Profiles for a High-Pressure Turbine

Open the PDF for in another window

Topics: Combustion chambers , Flow (Dynamics) , Temperature , Turbines , Design , Computational fluid dynamics , Turbulence , Temperature profiles , Simulation , Engines

Development of an Additively Manufactured Stationary Diffusion System for a Research Aeroengine Centrifugal Compressor

Jack T. Clement, Adam T. Coon, Nicole L. Key

J. Turbomach. March 2025, 147(3): 031004. doi: https://doi.org/10.1115/1.4066563

Abstract

View articletitled, Development of an Additively Manufactured Stationary Diffusion System for a Research Aeroengine Centrifugal Compressor

Open the PDF for in another window

Topics: Additive manufacturing , Compressors , Diffusers , Diffusion (Physics) , Instrumentation , Manufacturing , Pressure , Resins , Temperature , Stereolithography

Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions

Wanjae Kim, Tom I-P. Shih, Richard P. Dalton, Kenneth Mark Bryden, Sung Yong Chang, Gyu Sang Park

J. Turbomach. March 2025, 147(3): 031005. doi: https://doi.org/10.1115/1.4066567

Abstracts

View articletitled, Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions

Open the PDF for in another window

Topics: Ducts , Flow (Dynamics) , Heat transfer , Rotation , Friction , Reynolds number

Impacts of Material and Machine on the Variation of Additively Manufactured Cooling Channels

Abbigail Y. Altland, Thomas M. Corbett, Karen A. Thole

J. Turbomach. March 2025, 147(3): 031006. doi: https://doi.org/10.1115/1.4066580

Abstracts

View articletitled, Impacts of Material and Machine on the Variation of Additively Manufactured Cooling Channels

Open the PDF for in another window

Topics: Cooling , Heat transfer , Machinery , Surface roughness , Additive manufacturing , Friction , Diamonds , surface morphology , Design , Geometry

Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs

Thomas M. Corbett, Karen A. Thole

J. Turbomach. March 2025, 147(3): 031007. doi: https://doi.org/10.1115/1.4066581

Abstract

View articletitled, Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs

Open the PDF for in another window

Topics: Design , Flow (Dynamics) , Friction , Heat transfer , Pressure , Reynolds number , Surface roughness , Additive manufacturing

A Simplified Injection Model for Variable Area Turbine Fluidic Throttling

Alexander Spens, Evan J. McFadden, Cole D. Westrick, Jeffrey P. Bons

J. Turbomach. March 2025, 147(3): 031008. doi: https://doi.org/10.1115/1.4066673

Abstract

View articletitled, A Simplified Injection Model for Variable Area Turbine Fluidic Throttling

Open the PDF for in another window

Topics: Alkaline fuel cells , Computational fluid dynamics , Computer simulation , Ducts , Flow (Dynamics) , Nozzle guide vanes , Pressure , Turbines , Design , Modeling

Assessment of Additive Manufactured Micro-Channel Characteristics: Impact of Hydraulic Diameter Evaluation

Tommaso Bacci, Alessio Picchi, Niccolo’ Castelli, Bruno Facchini, Francesco Morante, Luca Innocenti

J. Turbomach. March 2025, 147(3): 031009. doi: https://doi.org/10.1115/1.4066700

Abstracts

View articletitled, Assessment of Additive Manufactured Micro-Channel Characteristics: Impact of Hydraulic Diameter Evaluation

Open the PDF for in another window

Topics: Additive manufacturing , Friction , Heat transfer , Microchannels , Surface roughness , Pressure , Shapes , Reynolds number , Cooling , Skin

Impact of Blowing and Density Ratio on the Film Cooling and Heat Transfer in an Aggressive Turbine Center Frame

Patrick R. Jagerhofer, Tobias Glasenapp, Bastian Patzer, Emil Göttlich

J. Turbomach. March 2025, 147(3): 031010. doi: https://doi.org/10.1115/1.4066562

Abstracts

View articletitled, Impact of Blowing and Density Ratio on the Film Cooling and Heat Transfer in an Aggressive Turbine Center Frame

Open the PDF for in another window

Topics: Film cooling , Flow (Dynamics) , Heat transfer , Cavities , Cooling , Density

Conjugate Heat Transfer Validation of an Optimized Film Cooling Configuration for a Turbine Vane Endwall

Xing Yang, Hang Wu, Zhenping Feng

J. Turbomach. March 2025, 147(3): 031011. doi: https://doi.org/10.1115/1.4066739

Abstract

View articletitled, Conjugate Heat Transfer Validation of an Optimized Film Cooling Configuration for a Turbine Vane Endwall

Open the PDF for in another window

Topics: Computational fluid dynamics , Coolants , Cooling , Film cooling , Flow (Dynamics) , Heat transfer , Pressure , Turbines , Jets , Design

Large Eddy Simulation Analysis of Loss Anomaly of a Turbine Blade With Large Trailing Edge Radius

Kenji Miki, Ali Ameri, Paul Giel

J. Turbomach. March 2025, 147(3): 031012. doi: https://doi.org/10.1115/1.4066914

Abstract

View articletitled, Large Eddy Simulation Analysis of Loss Anomaly of a Turbine Blade With Large Trailing Edge Radius

Open the PDF for in another window

Topics: Pressure , Suction , Turbine blades , Vortex shedding , Wakes , Waves , Flow (Dynamics) , Large eddy simulation , Blades , Reynolds number

Scale-Resolving Simulations of Turbulent Flow Retaining the Exact Blade Count With the Time-Inclined Method

Miguel Montiel, Roque Corral

J. Turbomach. March 2025, 147(3): 031013. doi: https://doi.org/10.1115/1.4067247

Abstract

View articletitled, Scale-Resolving Simulations of Turbulent Flow Retaining the Exact Blade Count With the Time-Inclined Method

Open the PDF for in another window

Topics: Blades , Cascades (Fluid dynamics) , Engineering simulation , Flow (Dynamics) , Pressure , Simulation , Turbulence , Wakes , Inflow , Modeling

Advanced Design of a Transition Duct for Supersonic Inlet Turbines in Rotating Detonation Engines

Noraiz Mushtaq, Matteo Pini, Paolo Gaetani

J. Turbomach. March 2025, 147(3): 031014. doi: https://doi.org/10.1115/1.4067242

Abstracts

View articletitled, Advanced Design of a Transition Duct for Supersonic Inlet Turbines in Rotating Detonation Engines

Open the PDF for in another window

Topics: Ducts , Explosions , Flow (Dynamics) , Mach number , Simulation , Turbines , Engines , Computational fluid dynamics , Design

Effect of Flow Distortions on Pin Fins in the Entry Region of Circular Channels

Evan Lundburg, Stephen Lynch, M. Eric Lyall

J. Turbomach. March 2025, 147(3): 031015. doi: https://doi.org/10.1115/1.4067296

Abstract

View articletitled, Effect of Flow Distortions on Pin Fins in the Entry Region of Circular Channels

Open the PDF for in another window

Topics: Aircraft , Boundary layers , Engines , Fins , Flow (Dynamics) , Heat transfer , Pins (Engineering) , Pressure

Phantom Cooling Effects on Rotor Blade Surface Heat Flux in a Transonic Full Scale 1 + 1/2 Stage Rotating Turbine

Richard J. Anthony, John Finnegan, John P. Clark

J. Turbomach. March 2025, 147(3): 031016. doi: https://doi.org/10.1115/1.4051245

Abstract

View articletitled, Phantom Cooling Effects on Rotor Blade Surface Heat Flux in a Transonic Full Scale 1 + 1/2 Stage Rotating Turbine

Open the PDF for in another window

Topics: Blades , Heat flux , Rotors , Turbines , Pressure , Temperature , Phantom cooling , Cooling

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Numerical Study on Unsteady Flow of a Supersonic Partial Admission Impulse Turbine

J. Turbomach

Gradient-free aerodynamic optimization with structural constraints and surge line control for radial compressor stage

J. Turbomach

Effect of blockages on film effectiveness on the pressure surface of a turbine blade

J. Turbomach

Unsteadiness in the Secondary Flows of a High-Speed Low-Pressure Turbine Cascade with Unsteady Wakes and Purge Flow

J. Turbomach

Design and Analysis of a Liftfan for eVTOL Aircraft

J. Turbomach

Research Papers

The Matching Mechanism and Flow Mechanisms of Supersonic Through-Flow Variable-Pitch Tandem Cascade

Investigating the Unsteady Dynamics of a Multi-Jet Impingement Cooling Flow Using Large Eddy Simulation

Influence of Dilution and Effusion Flows in Generating Variable Inlet Profiles for a High-Pressure Turbine

Development of an Additively Manufactured Stationary Diffusion System for a Research Aeroengine Centrifugal Compressor

Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions

Impacts of Material and Machine on the Variation of Additively Manufactured Cooling Channels

Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs

A Simplified Injection Model for Variable Area Turbine Fluidic Throttling

Assessment of Additive Manufactured Micro-Channel Characteristics: Impact of Hydraulic Diameter Evaluation

Impact of Blowing and Density Ratio on the Film Cooling and Heat Transfer in an Aggressive Turbine Center Frame

Conjugate Heat Transfer Validation of an Optimized Film Cooling Configuration for a Turbine Vane Endwall

Large Eddy Simulation Analysis of Loss Anomaly of a Turbine Blade With Large Trailing Edge Radius

Scale-Resolving Simulations of Turbulent Flow Retaining the Exact Blade Count With the Time-Inclined Method

Advanced Design of a Transition Duct for Supersonic Inlet Turbines in Rotating Detonation Engines

Effect of Flow Distortions on Pin Fins in the Entry Region of Circular Channels

Phantom Cooling Effects on Rotor Blade Surface Heat Flux in a Transonic Full Scale 1 + 1/2 Stage Rotating Turbine

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only